⭐ 5.0 rating · 7 years in SG · Smart Shade Specialists · FREE delivery ≥$200 · FREE install ≥$500 · WELCOME15 saves $15

Home / Guides / Inside vs Outside Mount Blinds

Buying Guide · November 2026

Inside Mount vs Outside Mount Blinds: Recess Fit or Face Fit for Your Singapore Windows?

Before you choose a fabric or a motor, there is a quieter decision that shapes how your blinds look and work: whether they sit inside the window recess or are mounted outside it, on the wall or ceiling above. It affects light gaps, how the window opens, what happens around grilles and handles, and even how big the room feels. Here is how to decide, window by window, in a typical Singapore HDB flat or condo.

What Inside Mount and Outside Mount Actually Mean

Inside mount (also called recess fit or reveal fit) means the blind's brackets are fixed inside the window opening, usually to the top of the reveal. The finished blind sits within the frame, flush or nearly flush with the wall. It looks tidy and built-in, and it leaves the wall around the window clear.

Outside mount (also called face fit) means the brackets are fixed to the wall or ceiling above the opening, and the blind is made wider and taller than the window so the fabric overlaps the frame on every side. The blind sits in front of the opening rather than inside it.

Neither is "correct". Many Singapore homes end up with both: inside mount where a window has a deep, clean recess, and outside mount where light control, obstructions or the shape of the wall make it the better fit.

Why the Choice Matters More in Singapore Homes

Local windows throw up a few specific challenges. HDB flats often have casement windows with protruding handles, and many have window grilles fitted on the inside. Bay windows have recesses of varying depth, and older flats may have uneven reveals after years of repainting. Condos tend to have aluminium-framed glass with slim or non-existent recesses, especially on floor-to-ceiling windows. And with strong equatorial sun on east- and west-facing walls, a thin line of light around a blind is far more noticeable here than in a cloudier climate.

Motorised blinds add one more factor: the headrail holds the motor inside the roller tube, so the recess needs enough depth for the whole assembly, and you need a plan for the power cable or battery charging port. That makes the mounting decision worth getting right before the blind is made.

Inside Mount vs Outside Mount: Side-by-Side

Factor Inside Mount (Recess Fit) Outside Mount (Face Fit)
LookClean, built-in, frames the windowBolder; can make a window look larger
Light gapsSmall gaps at both sides are unavoidableOverlap on all sides cuts edge light
Recess depth neededEnough to fit the headrail and motorNone, as it mounts on the wall or ceiling
Handles, grilles, sillsCan clash with protruding hardwareUsually clears them by mounting higher and further out
Uneven or out-of-square revealsGaps show where the recess isn't straightHides uneven edges behind the fabric
Blind size and costMatches the openingLarger than the opening, so slightly more area to pay for
Best fit forDeep, square recesses; bay window panels; kitchensBedrooms, shallow recesses, windows with grilles or handles

When Inside Mount Is the Better Choice

Choose inside mount when the recess is deep enough, reasonably square, and free of obstructions. It is a natural fit for HDB bay windows, where each panel of the bay gets its own blind sitting neatly inside the frame and the ledge stays usable as a seat or display shelf. It also suits kitchens and service yards, where you want the blind out of the way of cabinets and counters, and wardrobes or storerooms where cabinet doors open close to the window, as covered in our walk-in wardrobe and storeroom guide.

Inside mount works especially well with sunscreen roller blinds (from $55/sqm) and combi blinds (from $88/sqm) in living areas, where a little light at the edges doesn't matter and the minimal look does. Keep in mind the panel width limits: roller blinds go up to 3.0m per panel and combi or venetian blinds up to 2.4m, so a very wide recess will be split into two or more blinds that sit side by side.

When Outside Mount Is the Better Choice

Choose outside mount when light control is the priority. In a bedroom, especially one facing east or west, the overlap of an outside-mount blackout roller blind (from $60/sqm) blocks much more of the edge glow than an inside-mount one. If you are aiming for near-total darkness, read our bedroom sleep guide and consider layering the blind with a curtain track, as explained in our blackout vs sheer layering guide.

Outside mount is also the practical answer when the recess is shallow, when an internal grille or a protruding handle would stop an inside blind from hanging straight, or when years of plastering have left the reveal out of square. Mounting the blind above and slightly in front of the opening lets it clear the hardware and hides any uneven edges. Our guide to awkward windows with grilles, handles and ledges covers these situations in more detail.

There is a design benefit too. Mounting the blind higher than the window and a little wider makes a modest window look taller and larger, which helps in compact 3-room and 4-room flats where you want the room to feel more generous.

Product by Product: Which Mounting Style Suits Each Blind

Product Inside Mount Outside Mount
Roller blinds (from $55/sqm)Very common; neat look with sunscreen fabricsBest choice for blackout fabrics in bedrooms
Combi / zebra blinds (from $88/sqm)Popular for living rooms and bay windowsHelps reduce edge light with the Blackout tier
Venetian blinds (from $80/sqm)Works well if the recess fits the stacked slatsUseful where stacked slats would block the view
Outdoor zip blinds (from $170/sqm)Fitted with side tracks to suit the balcony openingFitted with side tracks to suit the balcony opening
Curtain track (from $150)Can sit in a ceiling recess or pelmetCeiling or wall fixed; 10cm single / 18cm double track clearance

Outdoor zip blinds are a special case: their side tracks hold the fabric edges in place, so they are planned around the balcony opening rather than chosen as recess or face fit in the usual way. Curtain tracks are different again, since the fabric always overlaps the window; the main question there is whether there is enough pelmet or ceiling clearance, about 10cm for a single track or 18cm for a double track.

Motor, Power and Smart-Home Considerations

Whatever the mounting style, the motor lives inside the blind's roller tube, so the choice mostly affects where the power cable runs. A wired motor uses a standard UK-type plug, so plan for a socket near the window and a tidy cable route: an inside-mount blind usually drops its cable down the side of the reveal, while an outside-mount blind runs it down the wall. A battery motor avoids the cable altogether for a $20 to $40 premium, with a recharge typically every 3 to 6 months, which is often the simplest answer where there is no socket nearby. Our battery vs hardwired motors guide compares the two.

Mounting style has no effect on smart-home features. Tuya/Smart Life and Aqara motors work the same way inside or outside the recess, with app control, schedules and voice control through Google Home, Alexa or Siri (via Aqara and HomeKit).

How to Decide, Window by Window

Walk round your home and ask four questions at each window. Is the recess deep enough for the headrail, and is it reasonably square? Is there anything in the way, such as a handle, a grille, a sensor or a window ledge you want to keep clear? How dark does the room need to be? And how do you want the window to look: built-in and minimal, or larger and more dramatic?

If the recess is deep, square and clear, and edge light is acceptable, go inside. If any of those fail, or the room needs real darkness, go outside. When you measure for your online estimate, note the recess depth and any obstructions alongside the width and drop. Our team will confirm the final mounting style at the free on-site survey before anything is made, so you won't be committed to a choice that doesn't fit. With a 5-6 week lead time for fabric-based blinds, it pays to settle this early in your renovation.

Frequently Asked Questions

Which mounting style gives better blackout, inside or outside mount?
Outside mount usually does. Because the blind is wider and taller than the window opening, the fabric overlaps the frame and blocks most of the light that would otherwise leak around the edges. An inside-mount blind always needs a small clearance at each side so it can roll freely, which leaves thin light gaps. For a bedroom that needs to be as dark as possible, outside mount with a blackout fabric, or a blind layered under a curtain track, is the safer choice.
My window recess is shallow. Can I still fit a motorised blind inside it?
Sometimes. A motorised blind's headrail and roller tube need a certain depth to sit fully inside the recess, and a shallow reveal, a protruding window handle or a grille can get in the way. When the depth is borderline, the blind can stick out slightly past the wall or be switched to outside mount. We check the recess depth and any obstructions during the free on-site survey before confirming the mounting style.
Does outside mount cost more than inside mount?
Our blinds are priced by area, so an outside-mount blind that is made wider and taller than the opening covers more square metres and costs a little more. Prices start from $55/sqm for roller blinds, $88/sqm for combi blinds and $80/sqm for venetian blinds, GST-inclusive, with a 1.5 sqm minimum billing size per blind. On a small window the minimum often applies either way, so the difference can be very small.
Will an outside-mount blind block my window handle or casement window?
It can if the blind is mounted too low or sits too close to the glass. Outside-mount brackets are usually fixed far enough above the opening, and far enough out from the wall, that the blind clears handles and lets casement windows open when the blind is raised. Tell us which windows you open often, and we will plan the bracket height and projection around them.
Can I mix inside-mount and outside-mount blinds in the same room?
Yes, and it is common in Singapore homes. A bay window might use inside-mount blinds in each panel while a nearby full-height window uses outside mount for better light control. To keep the room looking consistent, try to line up the top of each blind at a similar height and use the same fabric family, and group the motors in your Tuya or Aqara app so they still move together.

Not sure whether to mount inside or outside?

Get an instant online estimate on any product page, or message us on WhatsApp for a free on-site survey. We'll check every recess and recommend the right fit, with no obligation.

See Roller Blinds Chat on WhatsApp
💬 Chat on WhatsApp