Buying Guide · November 2026
One Wide Blind or Several Narrow Ones? Splitting Large Windows for Motorised Blinds in Singapore
Long living room windows, condo glass walls and the wide sliding doors on many Singapore balconies all raise the same question: do you cover the opening with one big motorised blind, or split it into two or three panels? The answer affects your quote, how the window looks, how much light leaks through, and how you use the blinds day to day. Here's how to decide.
First, the Hard Limits: How Wide Can One Blind Be?
Every blind type has a maximum width for a single panel. Beyond it, the fabric or slats can't stay flat and level, and the motor is working outside its designed range. For our range, the limits are:
| Product | Max width per panel | What happens on a wider window |
|---|---|---|
| Roller blinds (from $55/sqm) | 3.0m (S motor covers 0.46–2.0m, M motor 0.7–3.0m) | Split into equal panels, each with its own motor |
| Combi / zebra blinds (from $88/sqm) | 2.4m | Split into equal panels, each with its own motor |
| Venetian blinds (from $80/sqm) | 2.4m (all four slat materials) | Split into separate panels — beyond 2.4m slats sag and lift cords bind |
| Outdoor zip blinds (from $170/sqm) | 3.0m | Split across posts or beams — planned at survey |
| Motorised curtain track (from $150) | Runs the full length of the wall | One track, one motor — fabric draws sideways |
The online estimator on the roller blinds and combi blinds pages already does this for you: type in a width above the limit and it automatically splits the window into equal panels and prices a motor for each one. So for very wide windows, the real question isn't whether to split, but how many panels and where the joins go.
For windows under the limit, splitting is a choice. That's where the trade-offs below matter.
One Wide Blind vs Several Panels: Side-by-Side
| Factor | One wide blind | Two or more panels |
|---|---|---|
| Cost | Lower — one motor | Higher — one motor per panel (fabric cost is roughly the same, since it's priced per sqm) |
| Look | Seamless, uninterrupted fabric | Visible join(s) — neat if lined up with window frames |
| Light gaps | Only at the two outer edges | Small extra gap at each join |
| Flexibility | All up or all down | Raise one section, keep others down — useful for glare, privacy and doors |
| Access to doors/windows | Whole blind must go up to open the door | Only the panel over the door needs to move |
| Smart control | One device in the app | Several devices — group them so they move as one when you want |
| Fabric choice | One fabric across the window | Can mix (e.g. blackout on one side, sunscreen on the other) |
What Splitting Does to Your Quote
Because fabric is priced per square metre, cutting the same window into two panels doesn't change the fabric cost much. What changes is the number of motors. Motor top-ups on our roller and combi blinds are:
- A-OK Tuya Smart (plug-in): +$290 (S) / +$360 (M)
- Aqara Smart (HomeKit): +$348 (S) / +$385 (M)
- A-OK Tuya Cordless (battery): +$330 (S) / +$380 (M)
A worked example. Take a 2.8m wide × 1.6m high living room window in Basic Sheer Sunscreen roller fabric ($55/sqm). That's 4.48 sqm, or about $246 of fabric either way.
- One blind: at 2.8m wide it needs an M-size motor. With A-OK Tuya Smart that's $246 + $360 ≈ $606.
- Two 1.4m panels: each panel is narrow enough for an S-size motor. With A-OK Tuya Smart that's $246 + 2 × $290 ≈ $826.
So in this case, the flexibility of two panels costs roughly $220 more. Two other things to keep in mind: installation is $60 per blind, but it's free once your order reaches $500 (both options above qualify), and there's a minimum charge of 1.5 sqm per window, so splitting a small window into tiny panels rarely makes sense. Motor size is picked automatically from your dimensions, and we confirm everything at the free on-site survey. All prices are GST-inclusive. For the bigger picture on budgeting, see our 2026 cost guide.
When One Wide Blind Is the Better Choice
Bedrooms where darkness matters. Every join is a thin line where light can get through. If the window is under the width limit, one blind gives you fewer gaps. For the most complete blackout, pair it with an outside (face) mount that overlaps the frame. Our bedroom sleep guide covers this in more detail.
Fixed glass you never open. If nobody walks through the window and the whole width usually moves together, a second motor adds cost without adding much.
A minimal, gallery-style look. A single unbroken fabric reads cleaner, especially with plain blackout or sheer weaves.
Tight budgets across many windows. If you're fitting out a whole BTO or condo at once, saving a motor on each wide window adds up. Our guide to phasing a project room by room has more ways to stretch a budget.
When Splitting Into Panels Pays Off
Sliding doors to the balcony or yard. This is the most common reason to split in Singapore homes. With separate panels, you raise only the one over the door to step out to hang laundry or water plants, while the rest stay down for shade and privacy.
Windows that face two ways, or get sun at different times. On a west-facing living room, you might lower the panel that takes direct afternoon sun and keep the shaded panel up for the view. Separate panels also let sensor or sun-position automations act on just the side that needs it.
Mixed uses in one room. An open-plan living area with a TV at one end and a dining table at the other can have a blackout panel behind the screen and a sunscreen panel by the table — one window, two fabrics.
Windows divided by mullions. If the frame already has vertical bars, splitting the blind at those bars makes the joins almost invisible, and each panel lines up neatly with its own pane.
Easier servicing. Smaller panels are lighter to handle, and if one motor ever needs attention, the rest of the window still works.
Where to Put the Joins
Our estimator splits a wide window into equal panels by default, which looks balanced. At the on-site survey, we may suggest adjusting this so the joins sit where they're least noticeable:
- Over a mullion or frame post — the join hides behind the frame and the light gap is blocked.
- At the edge of a sliding door panel — so one blind covers the moving glass exactly.
- Matched to the pattern of the window — on a three-pane window, three panels usually look tidier than two.
If you'd like to measure first, our measuring guide explains how to note mullion positions and door widths so your estimate comes out closer to the final quote.
Making Several Panels Feel Like One
The worry many people have with split blinds is having to tap three buttons every evening. You don't. Each motor shows up as its own device, and you can group them:
- Tuya / Smart Life app: create a group (for example "Living Room Blinds") so all panels open and close together, while still letting you control each panel on its own.
- Aqara (HomeKit): group the panels in the Home app, so one tile or one Siri request moves them all.
- Google Home and Alexa: put the panels in the same room or group, so "Hey Google, close the living room blinds" moves every panel. See our Google Home and Alexa setup guide.
- Scenes: add all panels to a "Good Morning" or "Movie Night" scene, and set different heights per panel if you like. Our scenes guide has examples.
- Remote: a multi-channel remote can run each panel separately or all together.
Keep all panels on one window in the same motor ecosystem — all Tuya or all Aqara — so they group cleanly and move at the same speed. Mixing brands on a single window usually leads to panels that don't line up when they stop.
Power and Battery Notes for Split Windows
Plug-in motors use a UK plug to power, so two or three panels means two or three plugs near the top of the window. That's easy to plan during a renovation but can mean visible cabling in a finished home. Our power points and cabling guide walks through the options.
Cordless battery motors avoid the cabling, but each panel's battery is charged on its own, typically every 3–6 months. If you use the panels at different rates (say, the door panel goes up and down several times a day), they won't run flat at the same time. The battery vs hardwired guide compares the two in more depth.
Or Skip the Split: Consider a Curtain Track
For very wide walls — think a full condo living room of floor-to-ceiling glass — a motorised curtain track can be simpler than four or five blind panels. One track runs the whole length with one motor, and the fabric overlaps the frame, so there are no joins to worry about. Many homes combine the two: a curtain track for the wide living room glass and blinds for bedrooms and smaller windows. See our guides to track length for living rooms and sliding doors and blinds for floor-to-ceiling glass.
Quick Decision Guide
| Your window | Our usual suggestion |
|---|---|
| Bedroom window under 2.4–3.0m | One blind, outside mount for the best blackout |
| Living room window with a sliding door section | Split so one panel covers the door, grouped in the app |
| Three-pane window with mullions | Three panels lined up with the frame |
| Venetian blinds wider than 2.4m | Must split — two separate panels on a multi-channel remote |
| Full wall of condo glass | Curtain track, or several roller/combi panels grouped as one |
| Fixed glass, tight budget | One blind if it fits the width limit |
Frequently Asked Questions
What's the widest single motorised blind you can make?
Does splitting a window into two blinds cost double?
Will there be a light gap between split panels?
Can split panels open and close together with one voice command?
Can each panel have a different fabric?
Got a wide window to cover?
Enter your width in the roller blinds estimator to see how it splits and what it costs, or message us on WhatsApp for a free on-site survey — no obligation.
See Roller Blinds Chat on WhatsApp